

Le HF5111B est un serveur de port série RS232 RS422 RS485 vers ethernet 10/100.Il prend en charge le protocole TCP/IP/Telnet/Modbus. Le HF5111B intègre un contrôleur TCP/IP, une mémoire, un émetteur-récepteur Ethernet 10/100M, un port série haute vitesse et intègre une pile réseau TCP/IP entièrement développée et un système d'exploitation FreeRTOS. Le HF5111B comprend également un serveur web intégré utilisé pour configurer, surveiller ou dépanner à distance l'appareil connecté.
CB ou Paypal
Frais de port offerts (Mondial Relay) Colissimo : 8€
Vous avez 30 jours
Processeur : CORTEX-M3
Fréquence : 96 Mhz
Mémoire flash : 2 MB
SDRAM : 128 kB
Operating System : FreeRTOS
Interface Standard : RJ45
Vitesse : 10/100M
Protection : 8kV
Protocole réseau : IP, TCP, UDP, DHCP, DNS, HTTP, ARP, ICMP, Web Socket, Httpd client, ModbusTCP, NTP
Protocol sécurité : Client : SSL v3 (2048bit) Encryption: AES-CCMP. 3DES Authentication: SHA-1. MD5. Base-64
Nombre de port série : 1 x RS232/422/485
Connecteurs : R$232: DB9 pin type, RS485: 2 wire (A+, B-) , RS422: 4 wire (T+, T-, R+, R-)
Data Bits : 5,6,7,8
Stop Bit : 1,2
Check Bit : None, Even, Odd, Space, Mark
Baud Rate : 600 bps --- 921600 bps
Flow Control : RTS/CTS
Buffer : 4k
Configurations: Built-in webpage: Http Computer set-up software: IOTManager Serial command: CLI Support configuration record: Log Remote, Telnet
Compatibilité : Windows, XP/Vista, 7, 8, 10 Server 2003/2008/2012
Dimensions 95x95x25 (mm)
Poids : 210g
Température de fonctionnement : -40°C à + 85 °C
Température de stockage : -45°C à +105°C, humidité : 5 à 95% RH (sans condensation)
Tension alimentation : DC 5 à 36 V
OS supportés : Windows, XP/Vista, 7, 8, 10 Server 2003/2008/2012